Why did my campaign not run?
Updated 21 November 2026
The Short Answer
Most often it is switched off: every campaign arrives off, and most changes to a running one switch it off again. After that, its start time has not come round, its Who names nobody, a step has no words in it, or it did run and is waiting for you to approve it.
Work down these in order. Each one names the place on screen that settles it.
Is it actually switched on?
Open Campaigns and look at its switch: off means it is not running. When it is on, a line under its schedule on its card says when it next starts people, such as Next: Tomorrow, 9:00am; a card that is off is grey. The Off tab lists every one that is not running.
It can be off without you having switched it off:
- Every campaign arrives switched off, including one you add from Browse with Use This Campaign.
- Saving a change to a running campaign switches it off again — a step, its Who, its approval — so you see the turn-on check for what it is now. A change to its timing (When It Starts, Repeat, Stop sending once reply received) or its name keeps it on, and so do pausing people, taking a group off it, and adding people or groups.
- Pressing Cancel on the turn-on check leaves it off.
- A Give Instructions step with nothing in Your Instructions keeps it off: flipping the switch says Add your instructions to step 2., naming that step, until you write them.
Flip the switch at the top right of its card, or press Turn It On in the panel beside the cards, then Turn On or Turn On Anyway.
Has its start time come round?
Press its card and open Set Up in its panel. When It Starts says when it starts people — Every Day · 9:00am, for example. It does not run before that hour. The schedule decides when each person starts; after that, each step waits its own Then Wait days before the next one.
If it reads When You Send and a command such as /leases, it is an On Command campaign and never runs on a clock. Message PropKaki on WhatsApp or Telegram and type that command, and it runs straight away for whoever it names.
If it reads When They Come In, its Who is New Leads: it starts each new lead as they come in, counting only leads who arrive after you switched it on.
To change either, press the box under When It Starts right there — the change keeps a running campaign on. The same When It Starts is on the top box of the editor, behind Edit. Once it is on, its Upcoming tab lists who is due on each day, and at what time.
Does its Who name anybody right now?
On the panel's Set Up tab, look under Who It Goes Through. It shows how many people the campaign names today — Nobody yet, 1 person, or a number — and it is the same count the run uses.
Nobody yet usually means one of these:
- It points at a group that is empty, or one you have since deleted.
- It is set to all your groups and you have none yet. The turn-on check says It’s set to All Groups and you haven’t made any columns yet.
- Everyone it names has been paused — the field says Paused: … under its chips, and the card lists them under Paused.
A New Leads campaign shows no count at all: nobody is in it until a new lead comes in. Only leads who arrive after you switch it on count, and people you import or add yourself only if you add them by hand — Add to Campaign ▸, or ticked under Individuals.
Press Who It Goes Through and tick who it should reach — Everyone, or anyone under Individuals, Groups, Ads or Listings — then Ok. If the campaign was on, ticking more people or groups keeps it on; ticking Everyone, an ad or a listing switches it off, so turn it on again after.
Is one of its steps missing its words?
Press Edit in the panel and click through the steps.
- A Write Myself step sends exactly what is in its The Message That Goes Out box. Left empty, it sends nothing to the people at that step; the rest of the sequence still runs.
- A Use Template step whose template has been deleted sends nothing until you choose another. Its tile reads Template · A deleted template, and the turn-on check names it: Step 2’s template was deleted, so nothing goes out for it until you choose another.
A Give Instructions step needs its Your Instructions box filled before the campaign can be turned on at all.
If every step is Write Myself and every box is empty, the check says Nothing is charged for this one — and nothing will be sent either, because there’s no message written in it yet.
Why did it skip one person?
A campaign can be running and still pass one person by:
- You paused them. They sit under Paused on its card, and Who It Goes Through names them on Set Up: Paused: …. Resume on their row there puts them back.
- They are no longer in its Who. Someone who leaves a group, ad or listing it goes through gets no further step — except on a New Leads campaign, where a lead it started carries on.
- They replied. A reply stops the sequence for them — unless its card carries a Keeps Going After A Reply chip.
- Their last message from it is still waiting for you. It never queues someone's next step over one you have not sent or dismissed.
- They are between steps. The next step waits its Then Wait days after the one before.
- They have finished. A Once Each chip on its card means each person goes through it once.
- A blank in the words has nothing on file for them. They wait for you on Today, under Campaigns Waiting for You, and the check counts them: Step 2 (…): 3 have no property on file …
- Nobody can reach them. The turn-on check counts people with no number and no email: … can’t be reached at all — no number and no email.
- Your credits ran short. The check says when your balance covers only some of the list, and the run sends to that many.
- You stopped reading them. A campaign passes by anyone you chose Stop Reading for in the Inbox, on any of their numbers or emails. Resume Reading, in the band above their chat, brings them back.
- A daily send limit held them. Each mailbox and each WhatsApp number has its own Daily Send Limit; past it, the rest wait for the next day and PropKaki says so: 4 held for tomorrow — Outreach's daily limit is 20.
It ran, so why did no message go out?
Look under It Checks With You in the panel — or, if it reads Varies By Step, at each step's Approval in the editor:
- Notify Only — you're told someone is due; nothing is written unless you ask for it.
- Confirm Before Drafting — it asks you first, and writes the drafts when you say go. Every new campaign starts here.
- Approve Before Sending — drafts are written and wait for your approval.
Only Send Automatically sends by itself. The asking happens on the channel under it, Telegram or WhatsApp. If that channel is not connected, the turn-on check says so, with a Connect Telegram or Connect WhatsApp button.
Its Sent tab shows every message it sent and how far it got: a Didn’t Go row gives the reason, and Waiting for Meta is a template waiting for Meta's approval. See See how a campaign is doing.
On WhatsApp, a step that goes as a normal message reaches anyone who has not written to you in the last 24 hours as a link you open yourself. The check counts them — you will get a link to open yourself for each one — and a Use Template step sends them your template instead, once Meta has approved it.
