How do I set up a campaign?
Updated 17 November 2026
The Short Answer
Open Campaigns. Press a card on Browse, or New Campaign. In the editor, set who and when on the top box, then each step's message, channel, approval and wait, then save. It lands switched off; switch it on and a check opens before anything runs.
You end up with one campaign in your list, switched off until you have read its check.
Where do I start?
Open Campaigns. There are two ways in, and both open the same editor:
- Browse — the fourth tab along the top. It holds 35 campaigns written by PropKaki, under headings from Campaigns for Hot Leads to Campaigns for Past Clients, with chips along the top to show one kind of lead at a time; press any card.
- New Campaign — opens a campaign that already has three steps in it, Check In, Send Update and Send Greeting, ready for you to change.
If you have no campaigns yet, the screen reads Put Your Follow-Ups On Autopilot and offers the same two doors: Browse and New Campaign, the band's own button.
How do I start from a ready-made one?
- Open the Browse tab and press a card — or choose Use Campaign from its ⋯. The editor opens on it, with its one-line description under the name.
- Click the top box, which reads Choose Who, and set Who. Ready-made campaigns pick nobody for you.
- Change anything else you like — every field, + and bin works.
- Press Use This Campaign. As the editor says, It goes in switched off. Nothing runs until you turn it on.
You land back on All with your copy selected and its panel open. The card in Browse stays as it was.
How do I build one from scratch?
Press New Campaign. The editor opens on a campaign named Custom Campaign and a number — rename it with the pencil beside the name. Work down the boxes:
- The top box — Who, which starts on Everyone: press it, or Change, and Who It Goes Through opens, where you tick New Leads, groups under Groups, ads, listings or people under Individuals, and press Ok — and When It Starts: when each person starts — Every Day at 9:00am on a new one — or On Command.
- Each step — What do you want to do? (Auto ▸ opens the drafted kinds; under it sit Use Draft, Use Template, Write Myself and Give Instructions), How It Goes Out (WhatsApp, Email or Leave It In The App), then the message itself (on Email, with a Subject), Approval (a new campaign starts on Confirm Before Drafting; a new step copies the step before it) with on under it (Telegram or WhatsApp), and Then Wait: the days before the next step.
- The box after the steps — If A Step Can’t Reach Someone: under Backup Channels, the channels to try, in order, when a step's own channel can't reach someone. Add one with its +, move it with the arrows, remove it with its bin.
- The last box — Keep going until I turn it off, and Stop sending once reply received.
Add a step with any + between the boxes, up to 12 steps; remove one with its bin.
Who is the same picker as Who It Goes Through on the panel's Set Up tab: several groups, an ad, a listing, people by hand, and anyone you pause, all in one — see How do I choose who a campaign writes to?
With two or more mailboxes, an Email step also has Send From — Which of your mailboxes this step sends from. It starts on Each Person’s Usual Mailbox (The one you last emailed with them on, else Work, naming your main mailbox), or pick Always Outreach — Always and the mailbox's name — to send everyone from that one. A step on Always Outreach says up front what happens if that mailbox goes: If Outreach is disconnected, each person hears from their usual mailbox instead. See Which mailbox does an email go from?
How do I save it?
Only the button at the foot of the editor keeps your work — on a ready-made one it reads Use This Campaign. Cancel, the ✕, Escape or a click outside throw your work away, so if you have changed anything the editor asks first: Discard this campaign? on a new one, Discard your changes? on one you opened.
If Who is still empty, saving stops with Pick who it’s for. and opens the top box. Once saved, the campaign appears in your list, switched off, with its panel open.
How do I turn it on?
Flip the switch at the top right of its card, or press Turn It On at the foot of its panel. A check titled Turn On This Campaign opens: when it starts, who it goes through, what it uses in credits, where it will reach you, and how many people each channel reaches.
Every line is a warning, never a block. Press Turn On — it reads Turn On Anyway when some people can't be reached, nobody is in the list, or a channel a step asks you on isn't connected. Or press Cancel to leave it off and fix what it found.
A Give Instructions step with nothing in Your Instructions is the one thing that stops the check opening: the switch stays off and the top of the list says Add your instructions to step 2., naming that step. Press Edit, write the instructions in that step, press Save Changes, and flip the switch again.
How do I tell it worked?
Three places say so straight away:
- Its switch comes on, its card comes out of grey, and a Next line under its schedule on its card says when it next starts people — with an amber Sends Itself chip on its card on Send Automatically.
- The On tab lists it.
- The running count at the foot of the list goes up by one — 4 campaigns · 2 running, for example.
Nothing is sent at that moment. It starts people at the time its card shows under its name — Every Day · 9:00am on a new one — and on Confirm Before Drafting it asks you, on the channel under that step's Approval, before writing anything.
